Español
AD200 Jumbo Simba
360° radial, horizontal and parallel drilling from one compact tracked machine.
Machine configuration, quotations, spare parts and after-sales coordination.
One machine for Jumbo-style and Simba-style drilling
The AD200 combines the angular versatility required for radial production drilling with the low-level horizontal capability needed for tunnel development and face drilling. Its compact tracked platform is designed for underground mines, tunnelling and confined working areas.
Multiple drilling angles from one tracked platform
The tower can be positioned for vertical, horizontal, parallel, radial, upward and downward drilling. This flexibility can reduce machine repositioning and allows the AD200 to perform multiple underground drilling patterns from a compact platform.
Built for complex underground drilling patterns
360° Radial Drilling
Drill multiple angles from one machine position for Simba-style production patterns.
Horizontal Drilling
Suitable for tunnel development, face drilling and horizontal underground holes.
Low-Level Parallel Drilling
The tower can operate close to floor level for parallel horizontal drilling.
Vertical Long-Hole Drilling
Configured for DTH drilling in production, development and exploration applications.
Upward & Downward Drilling
Flexible tower positioning supports multiple underground drilling directions.
Compact Tracked Mobility
Self-propelled movement for underground mines, tunnels and restricted working areas.
More drilling versatility with less repositioning
| Conventional drilling setup | AD200 Jumbo Simba |
|---|---|
| Limited drilling angles from one position | 360° radial and multi-angle tower positioning |
| Frequent machine repositioning | Multiple drilling directions from one tracked platform |
| Limited low-height horizontal drilling | Horizontal drilling from approximately 150 mm above floor level |
| Different machines for different drilling methods | DTH, top-hammer and optional RC configurations |
Configure the machine for your application
DTH Drilling
- Production and long-hole drilling
- Horizontal drilling up to 40 m
- Depth above 70 m; upgrade stated up to 120 m
Top-Hammer Drilling
- Horizontal drilling up to 30 m
- Suitable for underground development work
- Air requirement depends on selected drifter
Reverse Circulation
- Optional RC upgrade
- For exploration and sample recovery
- Maximum indicated depth up to 60 m
360° tower movement for multi-angle production drilling
Use this video to demonstrate the machine's radial movement and its ability to drill multiple angles while reducing unnecessary repositioning.
Low-level drilling for tunnel and mine development
Use this video to show the tower positioned horizontally close to the floor for parallel drilling and underground development work.
Compact tracked mobility for confined working areas
The self-propelled tracked platform is designed for movement and positioning in underground mines, tunnels and restricted drilling environments.
See the AD200 move, position and prepare for drilling
Use this video for crawler movement, tower positioning, setup changes or a complete operational demonstration.
AD200 Jumbo Simba specifications
| Drive system | 100% pneumatic |
| DTH head motor power | 7.5 HP |
| Tower length | 3.5–5.7 m |
| Travel speed | 3.5 km/h |
| Gradeability | 30° |
| Track oscillation | 15° right + 15° left |
| Machine dimensions | 1,850 × 1,750 × 1,670 mm |
| Operating weight | 2,750 kg |
| Drilling diameter | 41–143 mm |
| DTH vertical depth | More than 70 m |
| DTH depth with upgrade | Up to 120 m |
| RC drilling depth | Up to 60 m |
| DTH horizontal drilling | Up to 40 m |
| Top-hammer horizontal drilling | Up to 30 m |
| Minimum drilling height | 150 mm |
| Maximum drilling height | 2.75 m |
| Minimum air supply | 375 CFM |
| Operating pressure | 8–14 bar, configuration dependent |
| Recommended rock hardness | 350–450 Brinell |
| Pull-down force | 1,830 kg |
| Pull-back force | 1,825 kg |
| Minimum recommended tunnel size | 4.5 × 3 m |
| Underground production drilling | Suitable |
| Tunnel development | Suitable |
| Horizontal face drilling | Suitable |
| Radial drilling | Suitable |
| Underground exploration | Configuration dependent |
| Reverse-circulation drilling | Optional upgrade |
Specifications may vary according to the selected drilling head, tower, compressor and optional configuration. Contact our technical team for the final approved configuration sheet.
Questions about the AD200 Jumbo Simba
What is the AD200 Jumbo Simba used for?
It is designed for underground production drilling, tunnel development, horizontal face drilling, radial drilling and selected exploration applications.
Can the AD200 drill horizontally?
Yes. The tower can be positioned horizontally and can drill close to floor level, subject to the selected configuration.
Can the tower rotate through 360°?
The supplied technical information states 360° radial tower movement for multi-angle drilling.
Which drilling methods are available?
The machine can be configured for DTH drilling, top-hammer drilling and optional reverse-circulation drilling.
What compressor capacity is required?
The minimum indicated air supply is 375 CFM, while the pressure and air volume depend on drilling head, depth and configuration.
Is support available in Chile?
Yes. Commercial and technical coordination is available in Chile through the Swastic Drilling and Maquinet team.
Ready to improve underground productivity?
Share your hole diameter, target depth, rock conditions, tunnel dimensions and available compressor capacity. Our technical team will recommend the appropriate configuration.
